+91 98209 33660
Precision-crafted OEM/ODM components built for continuous heavy-duty ventilation and cooling
Austria stands as one of Central Europe's most technologically advanced industrial hubs. From the heavy steel manufacturing complexes of Linz (Upper Austria) to the high-tech automotive innovation clusters in Styria (Graz), and the specialized timber processing mills across Tyrol and Carinthia, the operational demands placed on industrial axial fans are uniquely rigorous. Equipment operating in Austria must navigate high ambient temperature fluctuations across Alpine topographies, strict acoustic emissions limits governed by ÖNORM guidelines, and mandatory energy-efficiency directives enforced by the European Union’s ErP Directive 2009/125/EC.
As a global OEM/ODM manufacturing partner backed by over five decades of continuous electric motor and air-movement engineering (since 1974), our production facility delivers fully tailored axial fan assemblies and drive units engineered specifically for Austrian system integrators, HVAC engineering firms, and machinery manufacturers.
When engineering axial ventilation systems for Austrian industrial applications, standardized catalog fans often fail to meet long-term operational criteria. System engineers must solve four critical variables:
Higher altitude industrial sites in western Austria experience reduced atmospheric pressure, requiring recalculated blade pitch angles and higher motor shaft torque to maintain mass airflow rates.
Every fan impeller and drive unit imported into Austria must pass strict total system efficiency thresholds (FMEG standards), eliminating energy losses through aerodynamic blade profiling.
Austrian wood particle processing, sawmills, and chemical processing facilities require certified explosion-proof (Ex d / Ex eb) motor construction for Zone 1, 2, 21, and 22 environments.
To deliver measurable Information Gain for OEM machinery builders, our engineering desk abandons cookie-cutter stamped sheet metal blades in favor of 3D aerofoil section designs manufactured from pressure die-cast aluminum alloys (EN AC-46000) or glass-reinforced polyamides (PAG). FEA (Finite Element Analysis) structural simulation ensures that impellers withstand heavy aerodynamic loading and rotational stress up to tip speeds exceeding 110 m/s without blade deflection or resonance fatigue.
Dynamic balancing is conducted in accordance with ISO 1940 Grade G2.5 standards. By eliminating micro-vibrations at the rotor assembly level, bearing friction losses are minimized, extending double-shielded ball bearing (SKF/NSK) operational life past L10h 40,000 continuous operating hours even in elevated ambient temperatures up to +80°C.
Engineering parameters for OEM specification across industrial duty points
| Fan Series / Drive Type | Impeller Diameter Range | Airflow Capacity (m³/h) | Static Pressure (Pa) | Motor Efficiency | Acoustic Level (dB-A) | Certifications |
|---|---|---|---|---|---|---|
| AF-Heavy Steel Series | Ø 400mm – Ø 1250mm | 3,500 – 95,000 | 150 – 1,200 Pa | IE3 / IE4 Premium | 62 – 78 dB(A) | CE, ErP2015, ISO9001 |
| AF-ATEX Wood/Chem Series | Ø 315mm – Ø 1000mm | 2,200 – 65,000 | 120 – 950 Pa | Ex d IIC T4 / Ex eb | 58 – 74 dB(A) | ATEX Zone 1/2/21/22 |
| AF-HVAC Commercial Compact | Ø 200mm – Ø 630mm | 800 – 18,500 | 80 – 450 Pa | IE2 / EC Variable | 48 – 65 dB(A) | CE, RoHS, ÖNORM |
| AF-High Temp Smoke Extraction | Ø 500mm – Ø 1400mm | 5,000 – 120,000 | 200 – 1,500 Pa | F400 (400°C/2h) Class H | 65 – 82 dB(A) | EN 12101-3 Approved |
Our OEM axial fan manufacturing capabilities are built to interface seamlessly with specialized industrial equipment across Austria’s primary economic hubs:
High-static pressure axial fans equipped with IE3 copper-wound motors built to withstand heavy ambient dust, radiation heat, and continuous 24/7 duty cycles in steel mills and heat treatment plants.
Spark-proof aluminum inlet cones coupled with ATEX-certified motor enclosures (Zone 22 dry wood dust classification), guaranteeing safe exhaust air filtration in Austrian timber conversion facilities.
Low-noise, multi-blade variable pitch fans designed for integration into roof-top air handling units (AHUs), heat recovery exchangers, and urban district heating cooling towers requiring compliant acoustic signatures.
Reversible jet-axial ventilation fans built to EN 12101-3 emergency standards, engineered to operate reliably at elevated temperatures during emergency smoke spill situations in Alpine pass road tunnels.
Founded in 1974, our manufacturing enterprise brings over five decades of continuous shop-floor experience to every OEM project. Unlike assembly-only suppliers, we maintain total control over the raw manufacturing supply chain:
Every stator is wound in-house using high-purity electrolytic copper coils, vacuum-pressure impregnated (VPI) with Class F or H insulation varnish to resist thermal insulation degradation.
Fan housings, duct flanges, and mounting pitch circles are built to order matching exact OEM drawings, including DIN 24154 Eurovent duct dimensions for seamless Austrian retrofits.
Each unit undergoes locked-rotor testing, thermal rise evaluation, voltage breakdown testing, and aerodynamic flow performance verification per AMCA 210 standard guidelines before export clearance.
Technical clarity for engineers, sourcing directors, and OEM buyers importing custom fan machinery into Austria.
Yes. All axial fans exported to the European Union market, including Austria, meet or exceed EU Regulation No 327/2011 implementing Directive 2009/125/EC. Technical documentation detailing total fan efficiency (FMEG efficiency grades) and CE declaration of conformity are included with every serial dispatch.
Absolutely. Over 70% of our production volume is OEM/ODM customized. We work directly from customer STEP/DWG drawings to tailor motor shaft extensions, housing lengths, flange hole configurations, terminal box positions, and paint coatings (C4/C5 heavy anti-corrosion for Alpine humidity).
Our standard motor build features IP55 ingress protection with Class F insulation (rated to 155°C). For demanding Austrian chemical, outdoor, or elevated temperature setups, we provide IP65 / IP66 enclosures, tropicalized winding treatments, stainless steel hardware, and Class H insulation upgrades.
Engineering sample prototypes are typically finalized and static/dynamically tested within 14 to 21 working days following drawing sign-off. Bulk serial production orders are completed within 3 to 4 weeks, with flexible logistics support handling air freight or sea container shipment to Austrian logistics hubs (Vienna, Linz, Graz).
Yes. Motors intended for inverter speed control are engineered with inverter-grade magnet wire, phase insulation barriers, and optional insulated bearings to eliminate micro-arcing fluting damage under VFD high-frequency PWM switching.
Submit your airflow parameters (m³/h), required static pressure (Pa), voltage specifications, and dimensional constraints to our senior engineering desk. We deliver full CAD proposals and technical quotations within 24 hours.
Inquire Now